How much does it cost to exhibit?
Exhibit space costs $26.00/square foot (first 100 square feet) and $24.00/square foot for each additional square foot. Contact Ron Bates, Exhibit Sales, at 800-687-7469, ext. 230 or 703-683-8500, ext. 230, or email him at email@example.com.
The Press Room is located in Room E257. The Press Room is open the same hours as the Exhibit Hall: Sunday, 12-4 p.m., Monday 10 a.m.-3 p.m., and Tuesday 10 a.m.-2 p.m.
If you need more information or have any questions, please contact APWA Media Relations/Communications Manager at firstname.lastname@example.org, or 202-218-6736.
A complete list of current 2013 exhibitors is available by clicking here.
In addition to the face-to-face marketing opportunity, your booth fee for 10' deep booths provides you with 8' tall back drape and 3' tall side drape to separate your booth from those of your neighbors (note, island booths do not include these dividers, as these booths have aisles on all four sides). You also receive a 7"x44" company identification sign. All other booth furnishings and services are each exhibitor's responsibility. The Online Exhibitor Service Kit includes information for almost anything needed to make your booth complete. The only thing we require you to provide in your booth space is carpet. Requiring each exhibitor to provide carpet or other professional floor covering in their booth helps create a professional, aesthetically attractive environment for buyers and sellers alike.
APWA requires all exhibitors to provide a certificate of liability to NTP Show Management, prior to being allowed to set up exhibits. Exhibitors must insure their own exhibits and display materials. APWA requires each exhibitor to carry commercial general liability insurance in an amount not less than $1,000,000 combined single limit or bodily injury, accident and property damage combined per occurance/$2,000,000 aggregate. Exhibitors shall procure and continue in force insurance as required and must submit an original certificate to be submitted to APWA Show Management no later than 30 days prior to the first day of exhibit installation. (2013 Deadline: July 26, 2013). APWA will provide security guard service throughout the entire meeting, including the official periods of exhibit installation and dismantling. The furnishing of such service is in no case to be understood or interpreted by exhibitors as guaranteeing them against loss or theft of any kind.
TEG is the general service contractor for the event. They hire the labor that set booth drapes, hang signs, lay carpet, move freight, and do all the other physical work required to set up the show. TEG also produces all the graphics and supplies furnishings, registration areas, etc. Different than other contractors, they provide a personal level of attention paired with the ease of ordering ALL services through one point of contact - all of your exhibitor needs on one order form and invoice. A Customer Account Manager or CAM will be assigned to each exhibitor for a one-on-one relationship to assist you through the exhibiting process.
Material handling (often called drayage) is transportation of exhibit materials or products which exceed hand-carry limits (see next paragraph) to and from the freight door and your booth; provision of forklifts with operators if needed; removal, storage, security and return of empty crates; and assistance with other shipping needs. Order forms and rates are provided for this service in the Online Exhibitor Service Kit.
You can hand carry what one person can carry in one trip, provided you do not use any material handling equipment, such as forklifts, flatbeds, dollies, etc. All other freight must be moved by TEG-supplied union material handling labor. Vehicles on display must use spotting services provided by TEG. TEG Representatives will have sole responsibility in determining the loading and unloading procedures on the dock of the respective facility. Complete information and order forms are provided in the Online Exhibitor Service Kit.
All vehicles, including cars, with materials for delivery must check-in at the marshalling yard located west of Lake Shore Drive, approximately six blocks south of McCormick Place at 31st Street. Click here for marshalling yard instructions and directions.
Due to the large amount of machinery on this show (both self-propelled and requiring towing), the freight and machinery must be delivered first to the booths farthest from the dock, working in towards the closest booths to the dock. This allows for all freight to be brought in without having to dismantle or move booths or equipment that is already set.
A color coded targeted floorplan is included in the Online Exhibitor Service Kit. Please refer to your booth on this floorplan to determine if you have been assigned a target move-in. If you choose not to move-in during the targeted move-in day, please contact The Expo Group to avoid an off target surcharge. If you need additional information on targeted move-in or general move-in, please contact Marian Carew with TEG at email@example.com.
Exhibitors can drive into their space, however for safety reasons TEG freight personnel will spot (direct) the vehicles and all self-propelled equipment. The round trip fee for this service is provided in the Online Exhibitor Service Kit. Please note that all freight, including machinery and vehicles, needs to be delivered during the target move-in time to avoid off-target charges.
The definition of a POV is one which must be unloaded within 20 minutes by a full-time company employee, must be unloaded by hand without the use of any material handling equipment and must not be a closed-bodied vehicle with dual wheels. A POV is defined as a passenger car, pickup truck or van. Flatbeds 15’ or longer, UHaul’s or other box trucks and vans are not considered POVs and will be subject to standard material handling rates. TEG also offers a Cartload Service for POVs, should the freight be in excess of what the exhibitor can carry by hand. A one- way cartload is defined as the maximum amount of loose or boxed exhibit material equal to or less than 500 lbs. that will fit on a four-wheeled manually operated or electric flat cart, which has approximate flat-bed dimensions of 3’wide x 6’ long.
POVs are required to check-in at the Marshalling Yard. A $25 Marshalling Fee is charged per shipment.
Regular full-time employees of the exhibiting companies are allowed to set up their own exhibits without assistance from the union. Any labor services that may be required beyond what your regular full-time employees can provide must be supplied by union labor.
TEG will assign each exhibiting company with their own personal CAM (Customer Account Manager) upon signing up for the show. The CAM will contact the exhibitors several times before the deadline dates to assist and insure that the exhibitor has placed all orders in advance, including material handling. In addition, APWA has put together a Deadlines Checklist that is available in the Online Exhibitor Service Kit, providing the advanced price discount deadlines you need to be aware of. Always try to order prior to the deadlines date posted in the Deadlines Checklist and on the order form. Before leaving for the show, confirm with TEG and other contractors that your orders have been received, and bring copies to the show.
Information on ordering electrical service is provided in the Online Exhibitor Service Kit. If you order standard power for a 10' deep booth, it will always be distributed to the rear-center of the booth unless you specify otherwise on the form. If you have an island booth, you should provide a floor plan of your booth to the electrical service provider. Contact your CAM for clarification of any questions.
Rather than taking a business card, scanning visitors' badges is a quick and efficient way to collect attendee data. Each attendee will wear a badge with all of his/her registration information encoded on it. In order to scan and retrieve this information, you will need to rent a lead retrieval device. Information on lead retrieval is provided in the Online Exhibitor Service Kit. Don't forget to order electrical service for your reader!
While show management provides guard service on the perimeter of the hall, neither the guards nor show management can be responsible for watching each individual booth. We always recommend that small, valuable items are secured or removed at night by the exhibitor. Should you need to remove anything from your booth that is larger than a briefcase or laptop, please go to the NTP Show Management Office to obtain an Equipment Removal Pass. Overnight booth guard service is available. Information will be provided in the Online Exhibitor Service Kit. It's also a good idea to check your company's insurance policy to be sure it covers theft from trade shows and other events outside your office.